Board index Peugeot RCZ Peugeot RCZ Technical Discussion Exterior Lion badge on nose of classic RCz

Lion badge on nose of classic RCz

Body panels, spoiler, wipers, mirrors and windows, feline pack etc

Post Sat Feb 01, 2014 8:47 pm
t110jim Senior Member
Senior Member

Posts: 301
Kudos: 21
Location: Inverness
Does anybody know how to remove badge/ how it's fixed on


Post Sat Feb 01, 2014 10:06 pm
Abzynthe User avatar

Moderator
Moderator

Posts: 3891
Kudos: 1051
Location: Peterborough

There is a screw and plastic welds holding it onto the bumper. To access it, you need to unclip the top of the bumper attached to the slam panel. You can then break the plastic welds, undo the screw, and then thread the badge up through the gap.
Image

Post Mon Feb 03, 2014 9:51 pm
RCZ-Performance User avatar

Senior Member
Senior Member

Posts: 2028
Kudos: 252
Location: Banbury

Abzynthe wrote:
There is a screw and plastic welds holding it onto the bumper. To access it, you need to unclip the top of the bumper attached to the slam panel. You can then break the plastic welds, undo the screw, and then thread the badge up through the gap.


Exactly :thumbup:

Post Sun Aug 09, 2015 6:33 am
Cuore Sportivo User avatar

Senior Member
Senior Member

Posts: 237
Kudos: 67
Abzynthe wrote:
There is a screw and plastic welds holding it onto the bumper. To access it, you need to unclip the top of the bumper attached to the slam panel. You can then break the plastic welds, undo the screw, and then thread the badge up through the gap.


Can anyody expand on the bit about 'unclipping the top of the bumper' ?

Not sure how to do this. Is it difficult ? Any pics of the bit that unclips ?


Return to Exterior

cron